 |
Aurora spark plug wire sets have been designed for marine use in mind. Corrosion free construction and performance attributes that will make your boat run like never before, all add up to greater boating pleasure, reduced maintenance and safety.
Links to the marine catalogs can be found at the bottom of this page.
Aurora ignition wires are not only different than most in terms of their robust construction but... they feel different too! A feel that can be achieved by using only the highest quality silicone. Unlike the hard rubberized coatings of most wires, Aurora wires are supple and ultra smooth to the touch, offering superior strength yet with complete flexibility. Aurora spares no expense in offering you the best.
MARINE IGNITION WIRE SPECIAL FEATURES
- A true hybrid wire offering the full electrical noise suppression benefits of carbon core with the performance benefits of metal core.
- 400 ohms/foot stainless steel conductor.
- 7-15 times more current flow than carbon core wire.
- Fully shielded cable to eliminate both radio and computer noise interference. Marine electronics totally unaffected by RFI interference.
- Stainless steel or brass terminals (depending on the application) to eliminate corrosion.
- Double spring-lock terminals for a snug and positive connection.
- Terminals air crimped at 1100 psi to resist annoying pull-off.
- Superior quality high temperature magnetic suppression silicone wire that effectively resists current leakage as well as heat, vibration, moisture and age breakdown.
- High temperature silicone spark plug boots that resist burning and age deterioration. Rated to 550 deg F.
- 8.5mm silicone jacket, available in red or black.
- Lifetime Limited Warranty
- EVERY single wire individually bench tested to meet high quality standards.
- Single leads may be purchased at a later date should a wire be accidently damaged.
- Custom fitted for each application to ensure a proper and attractive fit.
- Enhances current flow from any ignition system for further horsepower, torque and fuel mileage gains.
Did you know that EVERY manufacturer recommends that carbon core be replaced every 2 years? Aurora wires NEVER need replacement...never!
All ignition wire sets offered by Aurora are 8.5mm and are OEM replacements (original equipment manufacturer), for proper fit and ease of installation. If you don't see your application listed, we can easily have a custom set made. Check out the Custom Building section for more information.
Aurora wire sets are available in either a sharp looking red jacket with white print or a beautiful black jacket with white print. More information on the construction of Aurora wires can be found on the Ignition Wire Features page.
Many marine wire sets (particularly 8 cylinder versions) are very long to ensure clearance of water cooled manifolds. Long wires generally mean high resistance and high resistance robs you of horsepower. A typical carbon core wire of 4 feet in length will have resistances in the order of 3,000 to 8,000 ohms per foot (for a combined resistance of 12,000 to 32,000 ohms!) Compare this with Aurora's 400 ohms per foot, with that 4 foot wire measuring only 1,600 ohms. You are guaranteed to feel a performance increase with Aurora wires. Smoother idling, quicker acceleration and, even better fuel mileage all add up to one thing....a more enjoyable boating experience!
Should you not find what you are looking for, please contact us and we will do our best to help you find the proper set.
© 2006-2012 Sudden Impact Performance. All rights reserved.
